What maintenance work does the sand making machine need?

SHANGHAI SHIBANG MACHINERY CO., LTD is one high-tech enterprise, which involves R&D, production, sales and service as well. In the past 20 years, we devote to producing mining equipments, sand making machines and industrial grinding mills, offering expressway, rail way and water conservancy projects the solution of making high grade sand and matched equipments.

As an important member of the sand and gravel production line, the sand making machine is very important for maintenance. Many people still think that the maintenance work of the sand making machine is optional, even some customers work in the sand making machine for a while. Respond to the manufacturer, the machine is not resistant to your use, always break the practice once, the quality of this machine is not good. However, after field inspections by the manufacturer’s staff, it was found that the customers did not pay attention to the maintenance and maintenance work of the sand making machine. This will also shorten the life of the machine. Let’s take a look at what maintenance work is required for the sand making machine.

SBM engineers recommend several side sanders for maintenance and maintenance:

1. Regularly observe the door to check the internal wear of the sand making machine, including the feeding tube, impeller, runner lining, circumferential guard, cone cap and wear block wear and repair or replacement. Replace the wear block to ensure that each wear-resistant The weight of the block is the same. Please pay attention to the inspection. It is necessary to stop the machine. It is strictly forbidden to observe the door and avoid danger. The parts need to be replaced with the parts produced by the same manufacturer.

2. The sand making machine should be added between the sections (about 400) to ensure the operation of all parts of the machine (pay attention to the use of professional cleaning grease); the working room up to 2000 needs to be the main bearing of the main shaft to clean the working room up to 7200 should replace the new bearing

3. The tensioning force of the triangle belt of the sand making machine should be adjusted to ensure the uniformity of the force of the triangle tape. The double-triangle tape on both sides of the drive should be matched to make each group fully capable of ensuring energy saving and high efficiency of the sand making machine.

Therefore, SBM reminds you that the sand making machine should be regularly inspected during use, and that potential problems can be discovered and hidden dangers can be eliminated, and the service life of the sanding machine can be extended.

Inquiry

Please fill in your name and your message and do not forget mail and/or phone if you like to be contacted. Please note that you do not need to have a mail programme to use this function.