Six reasons and characteristics of buying a construction waste crusher

SHANGHAI SHIBANG MACHINERY CO., LTD is one high-tech enterprise, which involves R&D, production, sales and service as well. In the past 20 years, we devote to producing mining equipments, sand making machines and industrial grinding mills, offering expressway, rail way and water conservancy projects the solution of making high grade sand and matched equipments.

Six reasons and characteristics of buying a construction waste crusher

  • First, the construction waste crusher has a simple structure and a remarkable effect
  • The construction waste crusher adopts two sets of rotors connected in series, and the material is sent to the inlet of the heavy construction waste crusher through the conveyor. The material crushed in the crushing and destroying chamber through the upper rotor immediately enters the lower-rotor of the high-speed torsion. The hammer head is broken again, and the material inside the crushing and destroying chamber collides with each other, crushing and destroying each other, forming hammer powder, destroying and destroying the material, and then directly discharging it from the discharge port to form a material particle with a discharge particle size of less than 3 mm. . This granule can meet the needs of brick manufacturers as internal combustion bricks.

  • Second, the construction waste crusher does not have a screen bottom, high humidity materials, no infarction
  • The construction waste crusher has the characteristics of large crack ratio, high efficiency and strong compatibility, and the design of the ring hammer type rupture machine has no screen bottom, and there is no requirement for the moisture content of the material, and there is no paste blocking screen. The problem is that there is no problem that the material can not be discharged in real time, and the problem of repeated crushing and destruction is destroyed. Therefore, the crushing and destroying efficiency is high, and there is no ineffective wear and tear of the hammer.

  • Third, construction waste crusher wear-resistant combination hammer
  • The hammer head of the ring construction waste crusher is forged and forged by the train wheel, and then the hammer head is processed by heat treatment to enhance the wear resistance and toughness. More and more suitable for the wear resistance of different hardness materials.

  • Fourth, the construction of the garbage crusher common shifting gap skills
  • The hammer of the construction waste crusher does not need to be repaired after being worn. The moving position can be used repeatedly. A hammer can be used with three hammers.

  • Five, hydraulic electric starting head shell
  • With the electric oil pump operation, the opening and closing of the lock is freely controlled, and the oil valve is reversing, which changes the serious safety hazard that the hand pump can not pull before, and the user is more safe in the process of application and maintenance.

  • Sixth, the construction waste crusher rotor disk is completely treated by heat, so that the wear life of the rotor disk is greatly improved, and the previous rotor disk repair is difficult, and the serious defects without wear resistance are changed.
  • The bearing boxes are all made of cast steel and each shaft box is fixed with four screws. Modification of the previous generation of products due to the looseness of the screws formed a serious safety hazard of the bearing box wear. Make the same equipment more scientific and more useful.

Inquiry

Please fill in your name and your message and do not forget mail and/or phone if you like to be contacted. Please note that you do not need to have a mail programme to use this function.