What are the factors affecting the output of coke ultrafine mills?

SHANGHAI SHIBANG MACHINERY CO., LTD is one high-tech enterprise, which involves R&D, production, sales and service as well. In the past 20 years, we devote to producing mining equipments, sand making machines and industrial grinding mills, offering expressway, rail way and water conservancy projects the solution of making high grade sand and matched equipments.

What are the factors affecting the output of coke ultrafine mills?

The coke ultrafine pulverizer is one of the more commonly used industrial milling equipment. Its output directly affects the efficiency of the entire project, and the factors influencing the production efficiency of coke milling are found. Increasing the production volume is crucial for every enterprise. Important, this engineer summed up the following points to discuss with you.

Factors affecting the output of ultra-fine mills:

  • 1, the hardness of coke. The harder the coke, the more difficult it is to grind, and the equipment wear is relatively severe. Because it will reduce the speed of Ultrafine mill powder, eventually leading to ultra-fine powder mill powder capacity.
  • 2. The humidity of coke, that is, the moisture contained in the material is large, the coke is easily adhered in the ultra-fine pulverizer, and it is also easy to be clogged in the process of feeding, resulting in a decrease in the fine powder power of the mill.
  • 3. The fineness of the material after the ultrafine powder is fine and the fineness is required to be high, that is, the finer the material from the mill is required, the smaller the milling capacity is.
  • 4. The composition of the material, the more fine powder contained in the material before the ultra-fine pulverizer, the more impact the ultra-fine pulverizer powder, because these fine powders are easy to adhere and affect the transport. For a lot of fines should be preceded by a sieve.
  • 5, the viscosity of the material. That is, the greater the viscosity of the material, the easier it is to adhere.
  • 6. The better the abrasion resistance of the milling part of the ultra-fine mill, the greater the capability of the ultrafine mill powder. If it is not wear-resistant, it will affect the ultra-fine mill powder capacity.

In general, there are three direct ways to increase the output of ultra-fine mills:

  • 1. Add fine crusher before fine grinding equipment;
  • 2. Improve the grinding system and improve the grinding efficiency;
  • 3. Add an efficient separator.

The coke ultrafine mill produced by SBM adopts the advanced structure of similar foreign products and is updated and improved on the basis of large-scale mill equipment. The equipment is more efficient than the ball mill, lower power consumption, smaller floor space, and less investment at one time. The grinding roller is tightly pressed on the grinding ring under the action of centrifugal force, so when the grinding roller and the grinding ring are worn to a certain thickness, the production and fineness of the finished product are not affected. The long replacement cycle of the grinding roller and the grinding ring eliminates the shortcomings of short replacement cycles of the consumable parts of the centrifugal crusher.

Inquiry

Please fill in your name and your message and do not forget mail and/or phone if you like to be contacted. Please note that you do not need to have a mail programme to use this function.