Can bentonite crusher process 100 mesh?September 28, 2019

Summary:Improve the cleanness of lubrication system in crushing and grinding equipment in beneficiation plant can ensure the smooth of lubricating oil circuit and the normal lubrication of the friction pairs

Can bentonite crusher process 100 mesh?

In the production process, the bentonite pulverizer has different requirements for the fineness of its own processing, and there are many types of equipment capable of processing the material, and the yield and processing fineness of different equipment types will be different. Then, today’s Xiaobian for everyone’s introduction to Southeast Asia, for the bentonite crusher can be processed to 100 mesh, how many tons can be achieved in one hour? A brief introduction below:

Bentonite is a very important and very important substance in nature. After the material has been processed into 100 mesh, 200 mesh, 300 mesh, and 400 mesh fineness by a pulverizer, most of it is used in various industries. The processed bentonite is widely used in the fields of agriculture, chemical industry, industry, and pharmaceutical industry.


At the same time, the fineness of bentonite processing is different, and its use is different. Therefore, the user selects the appropriate device model according to his own production needs. In the operation of the bentonite pulverizer, the material is crushed by rolling between the grinding roller and the grinding ring, and the wind is sent to the analysis machine through the wind power of the fan, and the materials satisfying the conditions are screened out.

The fineness of the material that can be processed by the bentonite crusher and the high-pressure mill can be adjusted arbitrarily between 80-325 mesh, and the output of the high-pressure mill is increased by 10-30% relative to the equipment under the same power.

Can a bentonite crusher process 100 mesh? The answer is of course affirmative, but when choosing a device, you need to choose according to the specific fineness requirements. If you need to process 100 mesh fineness, then it is recommended that you choose the device with the first fineness range. At the same time, high-pressure mills can achieve this fineness, but there is a certain difference in production. For the production, it is also a problem that many users are concerned about.

For the bentonite pulverizer, its own output is affected by many factors, such as the humidity and hardness of the material, which will affect the output. Therefore, the time production for the equipment is about 1-20 tons, and the high pressure mill can reach 1-25 tons. If the production requirements are relatively large, the model can be selected according to the data provided by the technician.