The crusher cavity of the cone crusher is often worn?

SHANGHAI SHIBANG MACHINERY CO., LTD is one high-tech enterprise, which involves R&D, production, sales and service as well. In the past 20 years, we devote to producing mining equipments, sand making machines and industrial grinding mills, offering expressway, rail way and water conservancy projects the solution of making high grade sand and matched equipments.

The crusher cavity of the cone crusher is often worn?

With the development of the industry, the demand for crushers is also increasing. Among them, cone crushers are widely used for crushing hard materials. The crushing chamber is the most critical part of the cone crusher. It controls the particle size of the crushed product and the output of the whole machine, and plays a great role. Of course, damage is also the most frequent, especially wear and tear is often present. Today, Xiaobian tells you the reason for the wear of the crusher of the cone crusher.


    • 1. High ore hardness

In the process of crushing ore in the cone crusher, if the hardness of the ore given is high or too large, the impact and collision force of the cavity wall of the crushing chamber will increase, and the long-term impact collision will aggravate the wear of the crushing chamber and cause damage to the crushing chamber. . It is recommended that the ore properties be controlled and not exceed the limits specified by the equipment.

    • 2. Excessive residual material in the cavity

Although some accumulated material remains in the crushing chamber under certain circumstances, it is protected that the crushing chamber is not damaged by direct contact with the material. However, too much material in the cavity will affect the breakage of the material in the cavity, and there is not enough space to operate. However, the system will automatically increase the impact on the material, and of course, it will bring some damage to the crushing cavity, or it will be seriously worn. phenomenon. It is recommended that the proper accumulation of material remains in the cavity, which is not easy to be excessive.

    • 3, the broken cavity is blocked

In the work, if the crushing chamber is clogged, it will not only affect the production capacity of the equipment, but also cause great damage to the crushing chamber. If the wear is serious, when the crushing chamber of the cone crusher is clogged, the material cannot be discharged quickly, and the fixed and moving cone parts still crush the material, and the impact and collision in the cavity are repeated, resulting in wear and damage of the crushing chamber. phenomenon.

    • 4, the quality of the broken cavity is poor

If the material of the crushing chamber is too poor, its toughness and wear resistance are very low, then in the work, the use time will not last long, especially when the material hardness is too high or too large, it will increase the wear of the crushing chamber quickly. Reduce the life of the crushing chamber. It is recommended to use the original material configured by the original factory.

    • 5, the feeding method is not correct

Feeding is a very critical step in the equipment. If the material is not put into the distribution tray at the time of feeding, but directly into the crushing chamber, it will cause great damage to the crushing chamber. Because when the material is not introduced into the cavity through the distributor tray, the steepness and slope of the feed are too high, which increases the inertial force of the feed, and it is easy to damage the crushing cavity or wear at the position of the crushing cavity component.


Please fill in your name and your message and do not forget mail and/or phone if you like to be contacted. Please note that you do not need to have a mail programme to use this function.